三菱 FX2N 三菱-FX2N-32DP-IF 硬件 手冊(cè)
資料介紹：
uidelines for the Safety of the User and Protection of the FX2N-32DP-IF
ofibus-DP Interface Unit.
is manual provides information for the use of the FX2N-32DP-IF Profibus-DP Interface Unit.
e manual has been written to be used by trained and competent personnel. The definition of
ch a person or persons is as follows:
a) Any engineer who is responsible for the planning, design and construction of automatic
equipment using the product associated with this manual, should be of a competent
nature, trained and qualified to the local and national standards required to fulfill that
role. These engineers should be fully aware of all aspects of safety with regards to
automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and
qualified to the local and national standards required to fulfill that job. These engineers
should also be trained in the use and maintenance of the completed product. This
includes being completely familiar with all associated documentation for said product. All
maintenance should be carried out in accordance with established safety practices.
c) All operators of the completed equipment should be trained to use that product in a safe
and coordinated manner in compliance to established safety practices. The operators
ofibus-DP Interface Unit.
is manual provides information for the use of the FX2N-32DP-IF Profibus-DP Interface Unit.
e manual has been written to be used by trained and competent personnel. The definition of
ch a person or persons is as follows:
a) Any engineer who is responsible for the planning, design and construction of automatic
equipment using the product associated with this manual, should be of a competent
nature, trained and qualified to the local and national standards required to fulfill that
role. These engineers should be fully aware of all aspects of safety with regards to
automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and
qualified to the local and national standards required to fulfill that job. These engineers
should also be trained in the use and maintenance of the completed product. This
includes being completely familiar with all associated documentation for said product. All
maintenance should be carried out in accordance with established safety practices.
c) All operators of the completed equipment should be trained to use that product in a safe
and coordinated manner in compliance to established safety practices. The operators
上一條：
下一條：相關(guān)下載
Bulude 廣州凌控自動(dòng)化科技有限公司 ◎版權(quán)所有
銷售熱線：020-28625769 傳真：020-28029239
